Yamaha Banshee YFZ 350 DC wiring Harness DC Conversion Complete fits 97-01

                                                    97-01 Banshee DC conversion harness
                                                              **REQUIRES FLOATED STATOR
** BATTERY AND REGULATOR NOT INCLUDED. Read more HERE
 
 
 
You must use a Solid State Single Phase Voltage Regulator like the BAJA DESIGNS 12203. It will fit in place of the stock regulator perfectly and is 100% plug and play with my harness.
 
Standard factory-style regulators will not work because they rely on a chassis ground to dump excess AC voltage. A full-wave unit forces all AC electricity from your floated stator through an internal diode bridge, cleanly converting it to DC before it reaches your battery terminals.
 
For a battery, I recommend the Mighty Max 1.3 AH. This is the same battery I used for many years with excellent results, and it has proven to be extremely reliable. It also fits perfectly in the factory tool compartment with no modifications required.
 
This is a 97-01 Banshee harness set up for DC conversion.
 
Banshee electrical systems are AC voltage. Lots of us like to upgrade the lighting on our Banshees to LED. While you can get away using LED lights on the AC system, lots of times they don't last a long time. The most annoying thing is the low idle flicker. The Banshee just doesn't produce enough voltage at low idle to power the LED. 
 
 With a  DC system you will be able to safely power LED lights, whips, add accent lights that serve the purpose of making your bike look sick at night and also providing light should you have trouble on the trail. All this with the engine off! Want to run whips or "parking lights" out on the dunes at night so you can be seen while chillin with the homies? you can do it with this setup.
 
This is a basic 97-01 harness. I can do any year, and add or remove anything you like. Just message me to customize your own harness.